Various gun nozzle sizes and shapes are available for use on the hot melt guns that allow you to match the desired bead width for each application.

AXCO introduces versatile 360 rotation extrusion handgun. AXCOs new AX-360 Handgun is an applicator for manually dispensing hotmelt adhesives for packaging, product assembly and sealant applications. Designed for use on manually operated hotmelt units, the lightweight, easy-to-maneuver handgun comes attached to a heated supply hose.
Various heated hose lenghts are available: 8 ft., 12 ft. and 16 ft. lengths. 
HMR PURGE BOXES - Used to drain tanks/collect drips from melters
HMR PURGE BOX - 5 LB. (QTY 10) HMR Part # HMR-PB5       $20.00
HMR PURGE BOX - 10 LB. (QTY 10) HMR Part # HMR-PB10   $25.00
HMR PURGE BOX - 25 LB. (QTY 10) HMR Part # HMR-PB25   $30.00




Watch HMR Product Demonstration  ------>
TOOLS & ACCESSORIES
SPEC SHEET
HOME
CONTACT
PRODUCTS
BROCHURE
GALLERY

Attaches to propane tank to heat HMR TAPE or do repair work to HMR joints and cracks.
Single Propane
Burner
Torch Extension
2 Burner
Propane Stove
1/2 Gal. Pour Pot



Joint Puller
$39.00
Custom made, solid steel, 1/2 gallon capacity hot material pour pot is ideal for applying HMR. Two handles allows installers to accurately delivery material. A swivel top with locking pin makes it easy to re-fill and keeps material from freely spilling out if accidentally knocked over or durning cool-down and transport. Add HMR 5 lb. blocks, HMR TAPE or stationary melter to refill. Optional insulation sleeves are also available.
$100.00
Can be used to heat HMR POUR POT or stationary melter. Uses propane tank. (not included)
$65.00
A "Must have" tool for pulling old wood out of standard size expansion joints. Can be used to pry old material out of the joint or places into the  joint and struck with hammer like a chisle to remove stubborn material such as impacted wood. 

$149.00
Watch HMR Product Demonstration  ------>
A "Must have" tool for pulling old wood out of standard size expansion joints. Can be used to pry old material out of the joint or places into the  joint and struck with hammer like a chisle to remove stubborn material such as impacted wood. 


$35.00


Call
Call
Call

HMR POUR POT,    Part # HMR-POT-SM     
Pour pots make installing HMR fast, easy and best of all, inexpensive! The metal pots can be used as a stand alone solution to heat HMR 5 lb. blocks or can be filled directly with pre-heated HMR from a stationary melter. Pour pots are heated on electric or propane operated heating devices that can be situated near your work area. Makes an ideal solution for areas that are upstairs, in tight areas or when using larger equipment is not needed.   
Watch HMR Product Demonstration  ------>
Fill HMR POUR POT with HMR TAPE, 5# HMR BLOCKS or from HMR Melter. 
$35.00